NOLI-Q WPF-ANTI SLIP
NOLI-Q ANTI SLIP is a latest hybrid composition of penetration and film forming formulation without using common acid etching method to create anti slip surface profile. During the first layer of application, the coating penetrates into substrate’s capillaries and performs inner coat crystallization. On second layer, it forms ultra durable hard film with gloss finishing while intensifying surface color.
NOLI-Q ANTI SLIP is composed of modified silica resin which forms highly functional ultra hard coating for surface protection, incorporating with micro beads. Cured film provides excellent coefficient of friction property, increasing the level of slip resistant.
• Glazed or non-glazed tiles flooring
• Sand stone walkway
• Polished concrete surfaces
• Artificial or natural wood decking
• Clay flooring
• Granite and marble
• Metal deck
Surface Preparation (Pre-Application)
A proper surface preparation helps to ensure maximum performance and durability of our coatings. The surface must be completely clean from grimes, dirts, dust & grease. Use our KLEAN-ORGANIC remover for mold and fungus removing or heavy duty degreaser for heavy stained surface.
Make sure the surface is completely dry and the application surface is below 35 Celsius. Separate the surface into small sections. Apply roller covering the surface horizontally and vertically, leave the solution to level by itself which usually takes up to 5 minutes. For non-absorbent tiles finishing, single layer is sufficient; for absorbent surface apply WPF-LIQUID SEALER as first layer e.g. concrete & stone surfaces second layer with WPF-ANTI SLIP to be apply after 4 hours.