NOLI-Q WP-C is a water based waterproofing formulation developed and produced by TEVO Creations, providing long lasting & effective waterproofing on almost all porous building surface, it is designed for environmental friendly and low VOC content. Due to its small molecular structure and low viscosity level (similar to water), it allows a deep impregnation and penetration into the capillaries, chemically react and bond with the with the substrate to create a durable waterproof surface.
Whilst NOLI-Q WP-C does not work as a sealant, instead of sealing the micropores of the substrate, NOLI-Q WP-C performs inner  coat. Coated surface remains breathable where moisture trapped behind the coated surface still able to evaporate through the pores to the environment, this is extremely important by releasing the inner pressure of the substrate, minimizing cracking of the surface.
NOLI-Q WP-C is also creates an effective barrier against organic mold, fungi & algae growth, preserving the surface appearance that last for years. Unlike conventional waterproofing coatings, NOLI-Q WP-C leave no trace on the coated surface; it is invisible and it will not alter the original natural appearance of the substrate. The completely invisible treatment cannot be removed by water, cleaning agent or with high pressure equipment; durable strong abrasion & mechanical wear resistant.

Applications Area
• External & Internal Walls
• Flooring Waterproofing
• Rooftop Waterproofing
• Grouting Sealing
• Render & Stucco
• Brickworks
• Clay
• Mineral plaster

Surface Preparation (Pre-Application)
A proper surface preparation helps to ensure maximum performance and durability of our coatings. The surface must be completely clean from grimes, dirts, dust & grease. Let the surface dry
of completely before application.

POST TREATMENT: Application can be done either by roller, brush
or sprayer. Apply adequately throughout the surface, make sure
the surface is damp with the product. Second layer can be apply
within 15 minutes from applying the first layer. Leave the surface
drys and cure for the next 24 hours, avoid contact with water.

AS WATERPROOFING ADDITIVE: During the mixture of cement,
replace 30% of water consumption